Fiber Optics

The range of specialised adhesives plays a critical role in the field of fiber optics connectors, photonics, sensors and telecommunication devices due to its ability to bond metals, ceramics, plastics, and glass strongly. 

Since the inception of fiber optic connectors and photonics development, adhesive technology has been extensively used in fiber optics manufacturing for the purpose of lenses, prisms, optical connectors, ferrules assembly, and many more related applications. 

During the initial phase, only epoxy chemistry has been key in the connectors assembly due to its structural strength and bonding integrity. With the progress of adhesive technology, light-curable acrylate adhesive, and 1-Component heat-curable epoxy also contributed to the advancement of the fiber optics assembly process. 

 

Products Applicable

Need A Solution?
Contact Us

Products Application

Optical Connectors-min

Optical Transceivers & Ferrules

Request for TDS>

Vitrobond® EPH 8353 is a unique 2-part, high-temperature epoxy system that is designed for use in electronic components, semiconductor, fiber optics, and medical device applications. This unique formulation will result in dark amber color when fully cured for visual inspection.

Product Features

  • Cured epoxy change to amber in color.
  • Sealing and bonding of fiberoptic into the ferrule.
  • Sensor bonding that resists temperature up to 200°C.
  • Provides structural strength for bonding voice coil magnet.
  • Low outgassing.

Everwide 2 Component Epoxy for Fiber Optics

Request for TDS>

JC181-1 is a one-component epoxy for the application of fiber optics, semiconductor, electronic and medical devices. This resin is easy to operate and exhibits perfect bonding for different substrates. For its performance and reliability, this product is used widely in various areas.

Product Features:

  • Room temperature stable and long pot life.
  • Low viscosity with good gap filling.
  • Fast cure at higher temperature.
  • Good thermal resistance.
  • Low outgassing.

Request for TDS>

JD455-17 is One-Component epoxy for fiber optics and electronic devices. This resin is easy to operate and exhibits perfect bonding for different substrates. For its performance and reliability, this product is used widely in various areas and especially for optical fiber bonding.

Product Features:

  • High Glass Transition Temperature.
  • Low outgassing & shrinkage after cure.
  • Excellent chemical and solvent resistance.

Request for TDS>

Microchip Bonding-min

Optical Lens

Request for TDS>

 

  • Vitrobond®EPH 5153 is a 2-component epoxy system that has transparent finishing when cured. It does allow visual inspection after casting and encapsulation. This epoxy has low outgassing, low thermal stress, and excellent water/moisture resistance functions.
  • Vitrobond®EPH 5200 is a 2-component, low viscosity epoxy system that will cure to high transparency for visual inspection purpose that exhibits good anti-yellowing property. It has good weather and electrical resistance when used for electronics potting application. It can also withstand mild chemicals and the surface is gloss when cured.
  • Vitrobond® EPH 8353 is a 2-part, high-temperature epoxy system that is designed for use in electronic components, semiconductor, fiber optics, and medical device applications. This unique formulation will result in dark amber color when fully cured for visual inspection.

Request for TDS>