DeoxIT® Grease & Lubricant
Good lubrication, good abrasion, excellent wear resistance, excellent pressure resistance, excellent oxidation (galvanic corrosion) protection, high dripping-point characteristics. Superior moisture resistance. Resist washout and excessive dilution by water assuring all-weather protection. Excellent mechanical stability. Safe on plastics.
DeoxIT® Grease - With or Without Particles
Soft, thixotropic grease for lubrication and protection of surfaces. Maximum lubrication for relatively clean surfaces. NEW!
Soft, thixotropic grease for lubrication and protection of surfaces. Maximum lubrication for relatively clean surfaces. The infusion of DeoxIT® D-Series D100L into the formulation provides an additional film on the metal surface to dissolve corrosion, improve conductivity and provide a moveable/flexible protective film on the surface.
Use when you require particles (conductive) to assist in oxide and corrosion breakup and good lubrication. Copper is conductive. Use in areas that two contacts will not touch and possibly short. Example: disconnect switches or large connectors and relays.
Use when aluminum metals are involved to assist break up corrosion. Use in areas that two contacts will not touch and possibly short. Example: aluminum rails, bolts, connectors.
Graphite provides excellent lubricating and heat transfer characteristics. Use where lubrication is vital and heat absorption and dissipation is important.
Use when you need particles (non conductive) to assist in oxide break up and you require good lubrication and abrasion. Quartz particles assist in breaking up oxidation and corrosion. Quartz is nonconductive.
Use when heat transfer, lubrication and assistance is needed in breaking up oxides and corrosion. Finer particles than the copper.
Use when lubrication is essential. Teflon particles are nonconductive.
DeoxIT® Grease Type L260 & L260NP (No Particles)
CAIG’s DeoxIT® L260 Grease is a lithium grease with unique additives to enable it to adhere and stay on the surfaces it is applied to. It has the tenacity to stick to surfaces. Additional additives allow it to displace moisture, prevent oxidation and corrosion and provides superior lubrication and protection. DeoxIT® L260 Grease’s unique properties allow it not only to be used on mechanical devices – also electrical devices and equipment; such as high powered switches, disconnects, connectors, relays and exposed connections in severe environments.