To enhance and protect the performance of expensive audio, video, communication equipment, and electrical appliances requires good contact cleaners that will not only removes oxidization but also provides excellent surface protection from the long-term exposure to the different indoor and outdoor elements.
Deoxit® contact cleaner dissolves oxides and sulfides that form on metal surfaces. This restores the contact’s integrity and leaves a thin microscopic layer that protects the metal. Special additives improve conductivity and prevent dissolved oxides from re-attaching, keeping them in suspension and allowing them to be easily dispersed by the mechanical action of the contact.
Over time all electronic connections deteriorate which can cause reduced performance or perhaps total failure. If only one of the thousand connectors in a system becomes intermittent or fails, then the equipment will cause errors, misreadings, noise, distortion, reboot, not start, or total failure.
- Brings systems back to life!
- Rejuvenates part/equipment back to original specifications
- Bring back reliability and dependability to equipment
- Reduce equipment downtime, especially on warranted equipment
- Save costly repairs or replacement
Unique contact cleaner, rejuvenator and protector.
The fast-acting deoxidizing solution cleans, improves conductivity, lubricates & protects.
DeoxIT® D-Series
- Removes oxidation & corrosion
- Improves conductivity without causing shorts
- Virtually eliminate intermittent signals
- Improves signal quality
- Increase data speeds
- Ideal for stationary and parts subject to vibration
- Reduces wear and abrasion
- Actively displaces moisture & contaminates
- Cleans, lubricates & seals connections
- ALL Metal Connections
- Batteries, Light Bulbs
- Switches and Relays
- Jacks and Plugs
- Harnesses, Grounding Blocks
- RCA jacks, XLRs, USB, HDMI, Ethernet, etc.
- Audio/Video
- Computers
- Automotive/Transportation
- Marine
- Electrical/Electronic
- Photography
- Energy
- Security
- Communications
- Avionics
- Medicals
DEOXIT® GOLD G-SERIES – CONTACT ENHANCER,
CONDITIONER & PROTECTOR
Maximize New System Performance and Critical Applications
DeoxIT® Gold G-Series
- Improves Conductivity
- Maintains Optimum Signal Quality
- Reduces Wear & Abrasion
- Prevents Fretting/Dendrite Corrosion
- Forms Protective Anti-tarnishing Coating
- Stabilizes Connections Between Similar and Dissimilar Metals
- Reduces Arcing, RFI, and Intermittent Connections
Use on plated connectors, contacts, and metal surfaces for
maximum performance and protection.
Recommended for critical applications where only slight cleaning action is necessary. If the surface looks clean, applying DeoxIT D-Series contact cleaner first is usually not necessary. DeoxIT® Gold is designed to dissolve small amounts of oxidation. Apply DeoxIT® Gold after DeoxIT® D-Series contact cleaner on plated metal surfaces, except where noted with DeoxIT® Shield S-Series below. The more critical the connection or part, especially low current applications, DeoxIT® Gold should be the final step.
- Audio/Video
- Computers
- Automotive/Transportation
- Marine
- Electrical/Electronic
- Photography
- Energy
- Security
- Communications
- Avionics
- Medicals
LUBRICANT & PROTECTANT FOR BETTER METAL ELECTRONIC CONNECTIONS & CONTACTS.
Recommended after DeoxIT® D-Series contact cleaner for best protection and NEW metal surfaces, usually in the manufacturing process. It is also ideal where high degrees of pollution (sulfur, salts, acids, etc.) are present. DeoxIT® Shield S-Series should be applied to a clean surface – after using DeoxIT® D-Series or other cleaning methods. For reference, DeoxIT® Shield has 0% cleaning action.
DeoxIT® Shield S-Series
- Improves Conductivity
- Lubricates & Preserves
- Long-Lasting in Severe Environments
- Reduces Intermittent Connections
- Works on Stationary & Moving
- Contacts and Connections
- Stabilizes Connections Between Similar and Dissimilar Metals
- Reduces Arcing & RFI
- Reduces Wear & Abrasion
- Temperature Range: -34 C (-29 F) to 210 C (410 F)
For reference, DeoxIT® Shield has 0.0% cleaning action
-
Severe Environment Connections
-
Batteries, Light Bulbs
-
Switches and Relays
-
Jacks and Plugs
-
Harnesses, Grounding Blocks
-
RCA jacks, XLRs, USB
-
HDMI, Ethernet, etc.
- Audio/Video
- Computers
- Automotive/Transportation
- Marine
- Electrical/Electronic
- Photography
- Energy
- Security
- Communications
- Avionics
- Medicals
DEOXIT® FADER F-SERIES
Moving Contact Lubricant for Conductive Plastic Faders and Controls
DeoxIT® Fader F-Series is a precision lubricant for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces).
It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.
.
DeoxIT® Fader F-Series
- Dissolves oxidation & corrosion
- Formulated for Conductive Plastics & Carbon-Based Controls
- Lubricates Faders, Switches, Potentiometers & other Mechanisms with Sliding Surfaces
- Maintains Optimum Signal Quality
- Reduces Wear & Abrasion
- Maintains Tactile Fee
- Temperature Range: -26°C to 150°C
- Lubrication/protection of plastic-to-plastic parts (faders)
- Plastic-to-metal parts (faders, linear sliders – dot matrix printers)
- Metal-to-metal parts (sliding and slow rotating metal parts, locks, bearings)
- Carbon-based controls (potentiometers) and membrane switches (mouse pointers, touch keypads)
- Damping Grease for Tactile Feel (DeoxIT® FaderGrease)
(Please refer to Audio 9-1-1 for detailed fader/ potentiometer maintenance information)
- Audio/Video
- Computers
- Automotive/Transportation
- Marine
- Electrical/Electronic
- Photography
- Energy
- Security
- Communications
- Avionics
- Medicals